OREC America RM98, Руководство по эксплуатации

Страница: 41 / 50

41
including dry earth and sand which cause faster wear and tear of the blades.

We recommend purchasing a spare set of blades in advance and keeping them close at
hand.

When replacing the blades, be careful not to lose the blade ring collar.
◇◇
You will know
it is time to replace the blade(s) if the gauge (hollow) at the back of the
blade mounting bolt is worn.
◇◇
How to fix the blades:
Please be aware that, once repaired, blades will not perform as when unit was initially
purchased.
1. Sharpen the blade as follows:

When you polish the blade, hold the blade firmly.

If the blade is sharpened parallel to the original
blade, it will cause damage.
Please sharpen as shown at left

To keep the balance of the blades, sharpen each
blade uniformly
2. Keep a flat surface of approx. 0.015”~ 0.024” (0.4~0.6mm)
on the cutting edge. If the blade is sharpened like a razor
blade, it will wear out and become blunt quickly.

When polishing with a grinder, apply water and avoid raising the temperature of the
blade, and polish gradually.

If the blade temperature is too high, the blade will retain heat and wear down sooner.

Do not work in places where there are hazards such as flammable fuel and batteries.

When using a grinder, always wear a hat, thick gloves, and security glasses. Always fix
the entire blade, not just certain sections. (Partial fix is prohibited!)

If both blades are not balanced, it causes abnormal vibration, and the machine may be
damaged.
How to maintain and inspect the battery:
Proper handling of the battery will lead to maximum performance. Mishandling of the battery
may result in reduced battery life or a serious accident.
Rehydration and replenishment of battery fluid:
■How to rehydrate:
Check the electrolyte level each day before operation. Even if not used, check the electrolyte
level once a month. If the fluid level drops more than halfway between upper and lower level
indicators replenish with
distilled water to the upper level indicator.

Electrolyte level cannot be below the lower level. It causes short battery life,
NOTICE