SoundWave 32Pro User's Manual
17
Section 1: Hardware and Software
SoundWave 32Pro CD-ROM Device Drivers
The following is a description of the device drivers
that are installed automatically in the CONFIG.SYS
and AUTOEXEC.BAT files, when a CD-ROM drive
option is selected from the Orchid Audio Hardware
Setup program. The CD-ROM selections available
are: Other, Sony and Mitsumi.
Other CD-ROM selection:
CONFIG.SYS
Device=C:\SWAVE32\SWCD.SYS /I:12 /A:360
The SWCD.SYS device driver initializes the
SoundWave 32Pro for the presence of a CD-ROM
drive. It is required by any CD-ROM option se-
lected.
where:
/I:
specifies the IRQ to the SoundWave 32Pro
used by the CD-ROM drive.
/A: specifies the I/O Address to the SoundWave
32Pro used by the CD-ROM drive.
NOTE: SWCD.SYS is the only device driver loaded
when the Other option is selected as the CD-ROM
choice. It must be loaded in the CONFIG.SYS file
before any other CD-ROM device driver. If you
have selected Other as your CD-ROM choice, you
will also have to install the device drivers provided
by your CD-ROM manufacturer. Refer to your CD-
ROM manufacturer's documentation for installa-
tion procedures.
Sony CD-ROM selection:
CONFIG.SYS
Device=C:\SWAVE32\SWCD.SYS /I:12 /A:360
Содержание SoundWave 32Pro
