12
1
2
1. Use a paperclip to briefly press the ‘PAIR’ button on the soundbar rear panel.
2. The soundbar PAIR status light will flash on the soundbar and woofer. This
acknowledges that the channel has changed.
There are a total of 10 channels. Shift the channel repeatedly until there is no more
interference. The soundbar will remember the channel when power is disconnected,
so once set, there is no need to re-set.
Pairing
To pair a subwoofer to the soundbar, follow this procedure:
POWER
ON
OFF
100V-240V~
SUBWOOFER VOLUME
WIRELESS
NORMAL
MAX
MIN
PAIR
PAIRING PROCEDURE:
Before you start: Long press the PAIR button
on subwoofer(s) to reset. WARNING - this
will cancel previous pairing.
1. Long press the PAIR button on the
soundbar until the unit confirms pairing
mode with a fast flashing STATUS light.
2. Short press the PAIR button on
subwoofer(s).
3. Short press PAIR on the soundbar to finish
pairing procedure.
STATUS
Compact Wireless Subwoofer
©2012 orbitsound ltd. Model: S1
Approved components used
AC IN
STATUS
ON: Paired
(good signal)
Flashing: No
signal / un-paired
Off: Off / Standby
1
2
3
4