11
IMPORTANT: Always make sure that the subwoofer’s side with a port (rear) is
clear from obstruction. Covering this port will adversely affect the sound.
Subwoofer volume
The subwoofer volume control on the back of the subwoofer allows you to preset the
amount of bass that the system produces. Setting to ‘normal’ is the recommended
balance. For quiet TV use, you can reduce the level. For louder music, you can
increase the volume.
Note: The Bass control on the remote also changes the volume of the subwoofer.
Hint: Once the subwoofer volume is set, you won’t need to adjust it often. It is set for the
conditions of the room.
Wireless
The Orbitsound wireless system is uniquely developed to deliver the best possible
listening experience in terms of minimal delay, and maximum sound fidelity. The
system uses a digital 2.4GHz signal, similar to that used by computer WiFi systems.
For the subwoofer to work with the soundbar, it has to be paired. At the factory,
the soundbar and subwoofer are paired for you. The soundbar and subwoofer
should work out of the box. Here are some procedures for resetting or changing the
wireless setup:
Channel selection
If you experience interference from a router, computer, or another soundbar
operating on the same frequency, you can change the channel that the Orbitsound
wireless system is running on.
Note: Interference usually sounds like the bass is stopping and starting, and maybe a
‘popping’ sound. This is easily fixed by changing channel.
To change channel - Make sure the soundbar AND subwoofer are switched on:
