Instruction Manual OXY-
SMART
17
9. Filter status
The sensor requires a minimum quantity of measuring gas in order to perform an
exact measurement. If this quantity is not reached, a higher or completely useless
measuring result is to be expected.
A used or obstructed filter may be the cause of this.
The measuring device can read the filter capacity (use - wear) and indicates the
result by means of an error message on the display:
In case of such a warning, please replace the filter and examine if the tube or the
hose kit are damaged or if foreign particles have been sucked in. In case of doubt,
replace the whole hose set incl. the tube. Please only use the filters prescribed by
ORBITEC GmbH.
Designation
Item No.
Illustration
Complete hose
kit
Item No.: 1.3.5016
Filter
Item No.: 1.3.5015
Cannula
Item No.: 1.3.5020
Spare hose 1m Item No.: 1.3.5019
Øa-7mm Øi-4mm L-1000mm Mat.: PVC
