Orbitalum REB 14, Руководство по эксплуатации

Страница: 21 / 40

Operating instructions REB 6, REB 14, REB 20 7 Operation
orbitalum tools gmbh
(06.10)
MT_REB 6_REB 14_REB 20_BA_04_790093762_02.doc
17
7.1.2 Clamping range REB 14
Clamping range pipe ID Wedges
[mm] [inch]
without clamping chuck and
with small clamping washer
with clamping chuck and
with large clamping washer
Column 1 Column 2
92 - 111 3.62 - 4.37 790 094 134
111 - 130 4.37 - 5.12 790 094 136
130 - 149 5.12 - 5.87 790 094 138
149 - 168 5.87 - 6.61 790 094 140
168 - 187 6.61 - 7.36 790 094 142
187 - 206 7.36 - 8.11 790 094 144
206 - 225 8.11 - 8.86 790 094 134
225 - 244 8.86 - 9.61 790 094 136
244 - 263 9.61 - 10.35 790 094 138
263 - 282 10.35 - 11.10 790 094 140
282 - 301 11.10 - 11.85 790 094 142
301 - 320 11.85 - 12.60 790 094 144
Code no. clamping washers 790 094 152 790 094 154
Code no. clamping chuck 790 094 130
7.1.3 Clamping range REB 20
Preparation of the pipe with REB 20 depends on its inner-Ø

with small clamping chuck
790 094 242
and small clamping washer
(column 1), or

with large clamping chuck
790 094 244
and large clamping washer
(column 2)
The wedges of the REB 20 are identical to the wedges of the REB 14.
Therefore the clamping range given on the wedges is only for the dimension
range 92 – 320 mm (3,62 – 12.60 inch). Choose at first the desired clamping
range of the REB 20 from the following table, and then choose the wedges
(clamping range) of the REB 14, stated in the same line.