background image

The ambient temperature range of the Orbit X is 

-20°C to + 45°C

The Orbit X shall be protected from contamin-

ation by liquid and dust; this is normally 
achieved by the operator carrying the device on 
their person.

The USB port may be used for charging the 
equipment when in the non-hazardous area 
only, using one of the following chargers 

specifically supplied for use with the unit:

Deltaco part number USB-AC35M 
 (ambient for charging is 0ºC to 45ºC)
Ansmann part number 1001-0007 
 (ambient for charging is 0ºC to 45ºC)

GlobTek model number GT-41078-0505-USB    

 (ambient for charging is 0ºC to 45ºC)

GlobTek model number 
GT-41078-0506-0.4-USB

 (ambient for charging is 0ºC to 45ºC)

Glob Tek model number GT*-46101-*05*-USB   

 (ambient for charging is 0ºC to 40ºC)

Glob Tek model number GT*-46101-*06*-USB  

 (ambient for charging is 0ºC to 35ºC). 

The maximum input voltage (Um) from the 
charger between the lines is 5.8 V

The USB port is also used for data download. 
The port has been assessed with a Um o

f 5.8 

V

 

and shall be installed in accordance with 

clause 12.2.1 of IEC 60079-14:2007/EN 

60079-14:2008

Conditions For Use (ATEX & IECEx)

Содержание M7QG1















Отзывы: