Orbit X M7QG1, Быстрое руководство

Страница: 8 / 14

Charging
Support
FAQs and technical support can be found
here: www.bartec-pixavi.com/support
The Orbit X has a high quality, high capacity
battery and shall only be charged using the
charger supplied with the unit. Charging the
Orbit X from 0% to 80% battery capacity
takes approximately
2 hours. Charging the
remaining 80% to 100% takes 1 ½ hours.
The Orbit X should not be used/operated
during the charging process.
Marking
Factory Reset
1. Turn device off
2. Press and hold Power and Camera button
at the same time. The Status LED will turn
constant Pink.
3. Press and hold the Light button until the
LEDs on the back blink red.
4. Press and hold the Camera button to
confirm. The status LED will blink Pink.
5. The device will re-start when finished.
Software Update
The Orbit X will update to the latest
software automatically when it’s connected
to the internet. The status LED will pulsate
“Pink” when it is updating. See the
“configure your OrbitX” section to set it up.