Orbit Controls OC 3010, Руководство пользователя

Страница: 10 / 26

10
1.6 Report printing
When the measurements are stored, the report can be printed. The record contains the
company’s head (can be disabled), time and date, and the measured values and the time.
The maximum deceleration value and the duration of the measurement will be printed as
well. After entering the time interval, the average value of overall deceleration and the
average value of the force or the air pressure will be calculated and printed.
If Hydro sensor or Weight sensor is used, their results will be printed as well. Two lines of
text are added to the printed report, containing the identification of the vehicle and the
confirmation of the measurement.
The printing on the 57.5mm wide paper is in ink. This will guarantee a long lasting quality.
The printing of one report takes about 15 seconds. The report may be printed several
times. The interval however in which the average values have to be calculated must be
entered all the time. The reports of previous measurements may be printed more times as
well.