Orbit baby G5, Руководство пользователя

Страница: 29 / 88

The following diagrams show how to properly install and remove the LATCH/
UAS connectors included on the car seat base.
Only install the car seat base with LATCH/UAS if using a vehicle seating location
that is recommended by the vehicle manufacturer. In addition, rear-center
seating locations in the United States may be used if the center-to-center
LATCH/UAS anchorage spacing is between 280mm and 500mm (11 and 20
inches) and this use is approved by the vehicle manufacturer. In Canada, the
nominal spacing on all approved UAS anchorages is 280mm.
To Secure :
To Remove :
Slide LATCH/UAS connector completely onto the
vehicle LATCH/UAS anchorage. You should hear a
CLICK when the connector locks onto the LATCH/
UAS anchorage.
Check that the LATCH/UAS connector is locked
onto the vehicle LATCH/UAS anchorage by pulling
out on it.
Press and hold the red release button on the
LATCH/UAS connector.
Slide LATCH/UAS connector off the LATCH/UAS
anchorage.
•
•
•
•
Usage Recommendations
29