Orbis VIARIS COMBI, Инструкция по эксплуатации, Страница: 69 / 120

21
TROUBLESHOOTING
Problem Resolution
The charger is powered and no plug
connected and with the light indicators
off.
Check the power according to the
connection scheme and that the
protections are activated.
Wait approximately the 10 seconds the
charger requires to boot.
Charger connected to the vehicle, the
status bar is green fixed and does not
charge.
There is no communication between the
vehicle and the charger; check the hose
and correctly inserted into the vehicle and
charger.
Charger connected to the vehicle, the
status bar is in blinking green and
does not charge.
The charger is not authorized to load;
pass the authorized RFID card.
Charger connected to the vehicle, the
status bar is in blinking green and
when the RFID card passes the
charger make 5 “bips” and the status
bar flashes in red and returns to fixed
green.
The RFID card is not authorized. Check
the list of authorized cards.
Charger connected to the vehicle, the
status bar is blue fixed and does not
charge.
Check that there is no time schedule on
either the charger (
) or the vehicle.
The vehicle may be in standby mode.
Open the vehicle door to exit the standby
mode.
Charger connected to the vehicle, the
status bar is in blue of varying
intensity and does not charge.
The charge modulator indicator is on;
the installation does not have sufficient
power to load the vehicle.
Charger connected to the vehicle, the
status bar is in blinking blue and does
not charge.
The vehicle has finished charging; check
that the battery is full or that the vehicle
has no time schedule.
Charger connected to the vehicle, the
status bar is fixed red and does not
charge.
Error; turn off the charger from the
protections and switch back on.
Charger connected to the vehicle, the
status bar is fixed blank and does not
load.
Reserved State, e.g. in an up-to-date
situation; wait till the reserved state ends.