Orbis VIARIS COMBI, Инструкция по эксплуатации, Страница: 67 / 120

19
Maintenance
The equipment is designed in such a way that maintenance will be much lower
because of the long life of its components. Maintenance will be limited to
cleaning the equipment, checking the operation and verification of the input
voltage values and differential protection. The equipment should undergo a full
inspection once a year.
In order to clean and check the equipment connections, it is very important that
it is disconnected from the power supply. Any operation that requires the
opening of the equipment must be carried out by personnel with the correct
technical qualifications and who is authorized to do so.
Technical features
Power supply |
Nominal frequency | According to features label
Power |
Consumption Empty: 5 W (16 VA)
Charging function: 9 W (16VA)
Recharge modes (as per model) Modes 1 and 2 according to EN 61851-1
Mode 3 according to EN 61851-1
Outlets For charging modes 1 and 2: according to
UNE 20315-1-2 fig. C2a (Schuko)
For charging mode 3: according to EN
62196-2 Type 2
Wi-Fi connection 802.11 b/g/n
Casing lock Using a key lock
Degree of protection IP54
Degree of mechanical protection IK08
Torque min. 1,2 Nm - max. 2,4 Nm
Stripping length 12 mm
Working temperature -30 ºC to +50 ºC
ATTENTION: This is a product with an embedded battery. Do
not dispose of the product without taking the precaution of
dismantling the battery and depositing it in a suitable recycling
container