PC 4500
6
Power
The scale is powered by 1X3V lithium cell
(CR2032). At the first time of use, open battery
case cover on the right end of the scale.
Remove battery isolation sheet
before use.
To replace battery
LCD will display "Lo" when battery power is low.
Replace battery as follows:
1. Hold the scale in one hand. The thumb and
index finger of the other hand hold and press
on the screw threads of the battery case and
pull out the battery case from the slot.
2. Push corner A outswards to release the used
battery.
3. To insert new battery, slide one side of new
battery beneath the retainer notch B & C. Press
the other side of battery till it clips underneath
the corner A.
Ensure to observe the polarity as illustrated in
the drawing.
4. Insert the battery case back to the slot on the
scale.
Care and maintenance
1. Wipe the scale with a slightly damp cloth. DO NOT immerse the scale in water or use chemical /
abrasive cleaning agents.
2. DO NOT stress the triangle ring for long time. During travel, keep the scale away from objects with
sharp ends (such as toy, stationery etc.), in case the scale is switched on frequently and consume battery
power.
3. To make sure accuracy, DO NOT use this scale in strong-magnetic field.
4. Keep the scale away from babies and children to avoid danger of swallow the batteries and small
components.
UNIVERSAL ADAPTOR
Before you use the universal adaptor, please read the following instruction manual first. This universal
adaptor is a compact one piece unit with 4 international adaptors, and provides a child protection safety
shutter, power indicator light and surge protector.
UNIVERSAL ADAPTOR
This item with fit the plugs in Europe / UK / USA / China / Japan / Australia / Spain and almost every
country in the world.
1. For EUROPE, just pull out the plug in the middle. After using it, just push the plug back into the pit.
