14
EN
Vacuum cleaner assembly
Do not remove the battery before attaching or removing accessories.
1. Insert the filter
Loosen the retaining clips on the top cover and
remove the top assembly from the ash container.
Replace the filter on the bottom of the top
assembly and put the entire assembly back on
the container.
Then secure the clips.
2. Insert the flexible hose into the vacuum cleaner
Insert one end of the suction hose into the suction opening on the container in the
correct position.
Hose removal:
Pull the hose out of the suction opening.
3. Insert the suction aluminum tube into the flexible hose
Attach the suction tube to the other end of the flexible hose.
4. Insert a charged battery
Turn the charged battery in the correct direction and slide it into the battery
compartment on the top assembly until it clicks.
To remove the battery, press the release button (red) on the battery and pull it out
of the top assembly.
Release button
(red)
