4
EN
1.3 Electrical safety
• Before connecting the device to the power supply for the first time,
make sure that the voltage on the device label corresponds to that of
the household electrical outlet.
• The electrical device is designed for mains supply 230 V ~.
The electrical safety of the device is guaranteed only if it is properly
connected to the electricity grid.
• Only use a power cord with a plug (mains lead) that came with the
device and compatible with a wall outlet. Using another cable may
result in fire or electric shock.
• Always connect an electrical device to an easily accessible power
outlet. In the event of an operating fault, the device must be switched off
as soon as possible and disconnected from mains supply.
• Do not pull the power cord / power cord by pulling on the cord / cord.
Disconnect the power cord by pulling the plug behind the power cord /
power cord plug.
• If you use an extension cord, check that the total rated (ampere) power
of all devices connected to the extension cord does not exceed the
maximum current rating of the extension cable.
• If you need to use an extension cord or power supply block, make sure
that the extension cord or power pack is plugged into a power outlet,
and not to another extension cord or power supply. Extension power
cord or power supply block must be designed for grounded plugs and
plugged into a grounded outlet.
• The power plug of the device must be compatible with the mains socket.
Never use any adapters or modify the socket in any other way. Do not
use inappropriate or damaged soclets.
• To avoid electrical shock, plug the power cables into properly grounded
electrical outlets. If the device is equipped with a 3-pin power supply
cord, do not use adapters that do not have a grounding element or
remove the grounding element from the plug or adapter.
• Do not bend, crush or otherwise expose the power cord / power cord of
the device to mechanical stress or external heat sources. Damage to
the power cord may result in electric shock.
• If the power cord is damaged, disconnect the device from the mains
and do not use it again. If the power cord / power cord is damaged,
it must be replaced by the manufacturer, its service department, or a
qualified person to avoid the risk of electric shock.
• Regularly check and maintain the electrical device as well as the power
cable. Disconnect the power plug regularly and clean it if necessary.
Pollution by dust or other substances may cause disruption of the
insulating state and consequently fire.
• Do not expose the device to water or moisture. The ingress of water
into the device increases the risk of electric shock. If the power cord is
wet or the device gets water, disconnect it immediately from the mains.
If the device is plugged into a mains socket and if possible, turn off the
power supply before attempting to disconnect the power supply. If you
are pulling wet wires from a live power source, be very careful.
