8
EN
- Do not use the AC adapter if it has been dropped, if it shows
signs of malfunction or damage, if it becomes excessively hot
or makes abnormal noises.
- If the AC adapter is connected to the mains, the surface of
the UPS may become slightly warm when the battery is being
charged. This is a normal operating condition and is not a
malfunction.
- If the AC adapter or power cord is damaged, it must be
replaced with a new, corresponding type. Replacement of
the power supply for your device shall be provided by the
manufacturer, its professional service or an authorized
qualified person.
- Only use the AC adapter indoors. Be careful to observe
the environmental characteristics and properties to avoid a
hazardous situation.
- Never connect the AC power adapter to an AC socket while
your hands are wet or the power cord or device is wet. Always
wipe the hands, power cord, and device thoroughly with a dry
cloth.
- Do not allow the power cord to hang over the sharp edges of
the furniture, as this may damage its protective insulation and
create a hazard.
- Only perform cleaning and user maintenance when the device
is turned off and unplugged. Never immerse the mains adapter
in water or other liquids.
Warning!
• The device and the AC adapter must not be left unattended
when connected to the mains.
• Never leave the device unattended and freely accessible
and do not leave it with an unplugged power cord. Children,
incapacitated persons or animals could pull the device off the
cord and cause serious injury.
Risk of electric shock! Risk of serious injury!
Warning!
• The device is designed for vacuuming dry dirt and liquids of a
small amount and range.
• Vacuuming dry dirt does not require special precautions for use.
Use suitable attachments for vacuuming.
• Observe the following precautions when vacuuming liquids:
- Use a soft plastic attachment for the purpose of vacuuming
liquids.
- Before picking up liquids, check the condition and contents of
the dirt container.
- Thoroughly empty the dirt container and remove as much
dry residue as possible. Mixing the dry contaminants in the
container and the liquid to be sucked results in a mass of
consistency that can seriously damage, damage or even
destroy the device.
