OrangeRx TX6i, Инструкция по эксплуатации

Страница: 18 / 24

Elevon:
The elevon function is used for planes that combine the elevens an ailerons together.
Setup:
1. Use the wheel to enable the elevon function and press the wheel.
2. Use the wheel to set the first channels position and press the wheel.
3. Use the wheel to set the second channels position.
4. Press and hold the wheel to save an exit, or press the cancel key to exit without saving.
V Tail:
The V-tail function is used for planes that have no elevators and has a V-tail rudder configuration.
The V-tail option will only be visible in the model setup menu when both elevators and rudders are
not in use.
Setup:
1. Use the wheel to enable the elevon function and press the wheel.
2. Use the wheel to set the third channels position and press the wheel.
3. Use the wheel to set the fourth channels position.
4. Press and hold the wheel to save an exit, or press the cancel key to exit without saving.
Aileron:
The aileron function enables flaps to be used as ailerons. The function sets a ratio between aileron
and flap movement which can be customized for the users’ needs. For example if flap one is set to
10% in the down column, when the aileron is at 100% movement the flap will have moved 1/10th
of that distance.
This function can also mix aileron movement to flaps and elevators.
Changes between single and dual aileron mode.
Setup:
1. Use the wheel to change between single and dual mode, if selecting single mode, press and
hold the wheel to exit, if selecting dual mode press the wheel using a normal press.
2. Use the wheel to change aileron 1 and 2 positions (positive and negative), roll the wheel to
change the value and press the wheel to change between settings.
18
6 CHANNEL TRANSMITTER
DIGITAL PROPORTIONAL RADIO
CONTROL SYSTEMPROGRAMABLE SYSTEM
3. If needed set the flaperon to a switch using the wheel then press the wheel.
4. Choose the flaperon position.
5. Press and hold the wheel to save an exit, or press the cancel key to exit without saving.