Reset Switch – Turn the Roller Button to reset the switch 1 to 8 or None to position up, mid or
down
Press and hold the Roller button to save an exit
or press the cancel key to exit without saving
Down and up Mode:
Timer State – Turn the Roller button to select “Stop” or “Run”. If “Run” is selected, the timer is
counted up
Reset - Press and hold the cancel key to reset the timer if needed, then press the Roller button
Set up – Turn the Roller button to set the time in min. and sec.
Enable Switch – Turn the Roller Button to enable the switch 1 to 8 or None to position up, mid
or down
Reset Switch – Turn the Roller Button to reset the switch 1 to 8 or None to position up, mid or
down
Press and hold the Roller button to save an exit
or press the cancel key to exit without saving
a. Use the wheel to change the status of the switch then press the wheel.
b. Use the wheel to change the reset switch then press the wheel.
c. Use the wheel to change the status of the switch then press the wheel.
d. Press and hold the wheel to save an exit, or press the cancel key to exit without saving.
Timer
This function is used to keep track of time to reduce the risk of aircraft running out of battery/fuel
and crashing. These are very useful when used in conjunction with a toggle.
There are two choices for timer: Engine timer and Multi. Timer. Engine Timer counts the time when
throttle value exceeds the set value. Both timers can be reset by touching the “Reset”, and engine
timer can modify throttle value by moving Roller button. Multi-timer can be selected up timer, down
timer and down then up timing. It can be individually enable and reset a switch 1 to 8
The type of timer can be selected from among up (UP), down (DN) and down then up (D/U). The
up timer is counted up from 0 and the elapsed time is displayed on the screen. The down time is
counted down from the set time and the remaining time is displayed on the screen. The down then
up is counted down and then started to count up.
Setup:
1.Select the “Timer” in Main Menu
2.Press and hold the Binding key to activate Range test
2.Move Roller button left or right to select Engine Timer or Mult. Timer
3.Engine timer
Timer is – Turn the Roller button to select the timer on
Mode - Turn the Roller button to select a mode (Up, Down, Down then up)
11
6 CHANNEL TRANSMITTER
DIGITAL PROPORTIONAL RADIO
CONTROL SYSTEMPROGRAMABLE SYSTEM
Mode - Turn the Roller button to select a mode (Up, Down, Down then up)
Up Mode:
Timer State – Turn the Roller button to select “Stop” or “Run”. If “Run” is selected, the timer is
counted up
Reset - Press and hold the cancel key to reset the timer if needed, then press the Roller button
Enable Switch – Turn the Roller Button to enable the switch 1 to 8 or None to position up,
mid or down
Reset Switch – Turn the Roller Button to reset the switch 1 to 8 or None to position up, mid or
down
Press and hold the Roller button to save an exit
or press the cancel key to exit without saving
Down Mode:
Timer State – Turn the Roller button to select “Stop” or “Run”. If “Run” is selected, the timer is
counted up
Reset - Press and hold the cancel key to reset the timer if needed, then press the Roller button
Set up – Turn the Roller button to set the time in min. and sec.
Enable Switch – Turn the Roller Button to enable the switch 1 to 8 or None to position up, mid
or down
Содержание TX6i
Страница 1: ...INSTRUCTION MANUAL 6 CHANNEL TRANSMITTER ...
