Manual for Tire Pressure Monitoring Systems, TPMS
9/17
Choosing preferred Pressure Units and Temperature Units
Step
Operation process
Photograph
1
By pressing the function key, it will switch among
displaying the pressure unit, displaying the temperature
unit, and displaying both pressure unit and temperature
unit by turns. The operator can choose which one to set
up first.
The system will remain the screen when it shows it more
than 10 seconds; the screen will remain the same after
system starts over.
2
If the pressure unit is chosen. Press the function key for 3
seconds, it will switch to kPa, psi, bar in turn. Once the
preferred unit is chosen release the function key.
3
If the temperature unit is chosen. Press the function key
for 3 seconds, and it will switch to °C and °F in turn. Once
the preferred unit is chosen release the function key.
