Manual for Tire Pressure Monitoring Systems, TPMS
16/17
2.
The buttons have no response.
1. The inner circuits of the receiver failed
Solution：Ask your distributor to have your receiver replaced, reconfigure its ID using the
Tire Switching Mode (Mode I), and send the defected receiver back to manufacturer for
repair.
3.
The receiver cannot receive signal from one or some certain tires (but not all
of them) after its power is turned on the numeric values representing the
locations of those tires displayed on the screen become “E2”.
1. There is interference from other electronic device in the vehicle
Solution：Remove other electronic device in the vehicle to determine if TPMS is interfered
by those removed devices.
2. The IDs of those tires do not set up correctly
Solution： Ask your installation supplier to reconfigure the IDs of those tires by using the
Single Sensor Replaced (Mode II).
3. The transmitter of those tires failed.
Solution：Ask your distributor to have those transmitters replaced, reconfigure the IDs of
those tires by using the Single Sensor Replaced (Mode II), and then send the defected
transmitter back to manufacturer for repair.
4.
The receiver cannot receive signal from any of the four tires after its power is
turned on the numeric values representing tire locations displayed on the
screen all become “E1”.
1. There is interference from other electronic device in the vehicle.
Solution：Remove other electronic device in the vehicle to determine if TPMS is interfered
by those removed devices.
2. The inner circuits of the display panel failed.
Solution：Ask your distributor to have your receiver replaced, reconfigure its ID using the
Single Sensor Replaced (Mode II), and send the defected receiver back to manufacturer
for repair.
5.
The buzzer has no sound output.
1. The inner circuits of the receiver failed.
Solution：Ask your distributor to have your receiver replaced, reconfigure its ID using the
Single Sensor Replaced (Mode II), and send the defected receiver back to manufacturer
for repair.
6.
The pressure (or temperature) values show the wrong tire locations
1. The IDs of the four tires are not configures correctly
