Manual for Tire Pressure Monitoring Systems, TPMS
2/17
Tire Pressure Monitoring Systems, TPMS
Tire Pressure Monitoring Systems (TPMS) improves safety while driving. Once installed in
your vehicle, the system will automatically monitor your tires in real-time for pressure and
temperature. When any tire’s pressure and/or temperature appear abnormal, the system
will, in real-time, transmit signals to active an alarm and show a digital figure to warn the
driver of a problem. The system aids safety, can extend the tire life and help reduce fuel
consumption.
Attention! This receiver and display unit is only compatible with Mazda
CX5 OE TPMS sensor. After installation, the receiver and display unit need
to do the relearn process to learn TPMS signal. Then the display will show
the correct tire pressure information on the display. Please refer to
“Sensor Relearn Method” in the manual.
NOTICE
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the factoring
measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Caution Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
