9
Oral-B ProWhite brush head
features a special polishing cup to
naturally whiten your teeth. Please
note that children under 12 years old
should not use the Oral-B ProWhite
brush head.
Oral-B Sensitive Gum Care brush head
provides thorough cleaning for
sensitive teeth and gums. It has an
extra soft bristle texture that is gentle
on teeth and gums.
Oral-B Ortho brush head
with special tufting pattern thoroughly
cleans and gently removes plaque
from teeth with braces.
Oral-B Power Tip brush head
The Power Tip is designed for
cleaning between teeth as well as
around bridges, crowns and implants.
Position the Power Tip at a 45 degree
angle to the gumline. Slowly guide the
Power Tip along the gumline, pausing
between teeth for excellent results.
Oral-B brush heads feature light blue INDICATOR
®
bristles to help you monitor brush head replacement
need. With thorough brushing, twice a day for two
minutes, the blue color will fade halfway down
approximately in a 3-month period. If the bristles
splay before the color recedes, you may exert too
much pressure on teeth and gums.
We do not recommend using the Oral-B FlossAction
or Oral-B ProWhite brush head with braces. You
may use the Oral-B Ortho brush head, specifically
designed to clean around braces and wires.
Synchronizing your
toothbrush
To avoid interference of display messages when
using more than one Oral-B Precision 5000 tooth-
brush with SmartGuide in the same household, you
need to assign the handles to their respective
SmartGuide.
You can synchronize a maximum of 2 handles with
one SmartGuide. To do so, push the «h/min» button
in the battery compartment for at least 3 seconds.
The SmartGuide shows «L---». Turn on your handle
to start the synchronization process. It is finished
when «L-1-» is displayed. Turn off the handle. To
assign a second handle to the same SmartGuide turn
on the other handle until «L-2-» is displayed. After
having synchronized the second handle, «Full» will
be displayed. Exit the synchronization mode by
pressing the «h/min» or «set» button, otherwise it
will end automatically after 30 seconds.
Cleaning
recommendations
After brushing, rinse your brush head under running
water with the handle switched on. Switch off and
remove the brush head. Clean handle and brush
head separately; wipe them dry before reassembling.
Disassemble the charging unit before cleaning. Brush
head compartment and protective cover are dish-
washer-safe. Both basic charger and SmartGuide
should be cleaned with a damp cloth only (picture 5,
page 5).
Wall mount
Use the adhesive tape (k) if you prefer to mount the
SmartGuide on a wall, mirror or other surface. Make
sure the chosen surface is clean and dry. Position
the wall mount (j) with the Oral-B logo readable and
press it evenly and firmly to the wall. Wait 24h before
sliding the SmartGuide into the fixed wall mount
(picture C, page 4). The adhesive tape will not work
on dirt-repellent surfaces.
Subject to change without notice.
Environmental Notice
This product contains rechargeable batteries.
In the interest of protecting the environment,
please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at an Oral-B Service Center
or at appropriate collection points provided in your
country.
92166758_D34_NA.indd 9
92166758_D34_NA.indd 9
18.01.12 13:52
18.01.12 13:52
