manualshive.com logo in svg

Oracle X8-8, Руководство по установке

Поделиться
Скачать
Oracle X8-8 Скачать руководство пользователя страница 22

Optional Component Installation

■

Laptop running terminal emulation software

Related Information

■

“Installing the Server Into a Rack” on page 41

Optional Component Installation

Standard system components are installed at the factory. Optional components that you

purchased independently of the standard configuration are shipped separately, and in most cases

can be installed before you install the server in a rack.

You can order and purchase the following optional components separately:

■

PCIe cards

■

DDR4 DIMM memory kits

■

Storage drives

■

CMOD upgrade kit

If you ordered field-replaceable units (FRUs) or customer-replaceable units (CRUs), refer

to the service label on the top cover of the server, or the component removal and installation

replacement procedures in 

“Servicing Components” in 

Oracle Server X8-8 Service Manual

.

Supported components and their part numbers are subject to change over time and without

notice. For the most up-to-date list, review the Oracle System Handbook, which is available

from the My Oracle Support website.

Note - 

You must have an Oracle Service contract to access the Oracle System Handbook

from My Oracle Support. Customers with service contracts can also access the Oracle System

Handbook at 

https://support.oracle.com/handbook_private/

.

To access the handbook, log in to My Oracle Support at 

https://support.oracle.com

.

Click the Knowledge tab, and in the knowledge links, click Oracle System Handbook. In the

handbook, click Current Systems, and click the name and model of your server. On the product

page that opens for the server, click Full Components List for a list of components.

Related Information

■

“Server Components” on page 25

22

Oracle Server X8-8 Installation Guide • June 2019

Содержание X8-8







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды