Oracle Talari E500, Руководство по оборудованию

Страница: 16 / 22

Oracle Talari E500 | Hardware Guide
Network Deployment Options
Before getting started it is important to determine how the E500 will be deployed.
When considering deployment options for the E500, please note that
all bypass pairs
will default to Fail-To-Block until configured otherwise .
Example instructions for some of the most common deployment scenarios are
provided below:
E500 as a Router (Gateway, Fail to Block)
Description: The E500 is deployed as the WAN gateway for the site, and bypass pairs
are configured as Fail-To-Block. Use this option if you plan to use the Talari
Appliance as the edge device for the site. Proceed to the pages below based on your
installation method:
Easy 1
st
Install: Page 12
Manual Install: Page 14
E500 as Layer 2 Fail-To-Wire (Overlay)
Description: The E500 is deployed on the LAN side of the gateway, and bypass
pairs are configured as Fail-To-Wire. Use this option if you prefer to retain existing
edge devices or plan to install an alternative edge device on the WAN side of the
Talari Appliance. Proceed to the pages below based on your installation method:
Easy 1
st
Install: Page 12
Manual Install: Page 14
E500 with MPLS & Internet Hybrid
Description: The E500 is deployed as an overlay for MPLS while performing
routing/firewall capabilities for internet links. Use this option if recommended by your
SA, or if you have an MPLS/Internet hybrid network and will not be using the CE Router
Replacement functionality of the Talari APN. Proceed to the pages below based on
your installation method:
Easy 1
st
Install: Page 12
Manual Install: Page 14
Other Options
There are other deployment options, and our Talari Implementation team members
will assist you with planning and deploying your new appliance.
1 1