Oracle Talari E500, Руководство по оборудованию

Страница: 17 / 22

Oracle Talari E500 | Hardware Guide
Deploying the E500 APN Appliance
Easy 1st Install
Site Deployment Criteria:
NCN :

Easy 1
st
Install can be used once the Network Control Node (NCN) has been set
up for your network. If the E500 being deployed is intended to become the NCN,
please see the instructions for manual installation.

Active Appliance Package: The NCN must be running an active configuration
which includes the E500 for the site being installed.
Client Site Connectivity :

Internet, DHCP, and DNS connectivity to the management interface are
required to use Easy 1
st
Install. If one or more are not available, please see the
instructions for manual installation. If the management interface is connected to
the LAN segment, communication with the public Internet will be blocked and
Easy 1
st
Install will fail.

Cable the LAN and WAN ports in accordance with the Talari configuration for
the site.
Use NCN to Upload Client Package to Registration Server:
1. Log in to the Web Console of the NCN.
2. Navigate to
Configuration > Easy Install.
3. Locate the Site name of the E500 being deployed.
4. Click the Edit pencil
to open the Set Serial Number window.
5. Enter the serial number of the E500 being deployed and click the Set Serial
Number button. (The serial number may be located on the read panel of
the appliance.)
6. Observe the Upload/Activate column. Click the Upload/Activate text when it
appears.
7. Continue to observe the Upload/Activate column. Once the text reads Upload
Complete , proceed to the next section.
Deploy the Talari Appliance:
8. Cable the E500 with the provided cables.
9. Ensure that the appliance management interface is cabled for Internet
connectivity.
10. Connect the power cord to the E500. Connect the other end to an
appropriately grounded power source. The E500 will power on automatically.
11. The E500 will begin the Easy 1
st
Install process. Please allow up to ten
minutes for the process to complete. (From the NCN Web Console, observe
the
Configuration > Easy Install page for status updates during installation.)
12. Once the Easy 1
st
Install process has completed, the Talari service
will automatically be enabled.
1 2