Oracle Sun ZFS, Руководство по обслуживанию

Страница: 136 / 146

For hardware faults, you may be able to select the affected hardware component to locate it on
the
Hardware screen.
Repairing problems
Problems can be repaired by performing the steps described in the suggested action section.
This typically involves replacing the physical component (for hardware faults) or reconfiguring
and restarting the affected service (for software defects). Repaired problems no longer appear
on this screen.
While the system typically detects repairs automatically, in some cases manual intervention
may be required. If a problem persists after the affected components have been repaired, contact
support. You may be instructed to mark the problem repaired. This should only be done under
the direction of service personnel or as part of a documented Oracle repair procedure.
Related features
■
A persistent log of all faults and defects is available under Logs as the
Fault log
.
■
Faults and defects are subcategories of Alerts. Filter rules can be configured to cause the
appliance to email administrators or perform other actions when faults are detected.
Logs
Introduction
Alerts
This is the appliance alert log, recording key events of interest during appliance operation. The
following are example alert log entries as they would appear in the BUI:
Time Event ID Description Type
2009-9-16
13:01:56 f18bbad1-8084-4cab-c950-82ef5b8228ea An I/O path from slot 'PCIe 0'
to chassis 'JBOD #1' has been
removed.
Major alert
2009-9-16
13:01:51 8fb8688c-08f2-c994-a6a5-ac6e755e53bb A disk has been inserted into
slot 'HDD 4' of chassis 'JBOD
#1'.
Minor alert
Logs
Sun ZFS Storage 7x20 Appliance Customer Service Manual • December 2011 E26399–02 136