Oracle StorageTek SL3000, Руководство пользователя

Страница: 209 / 216

VOLSER
Glossary-7
Redundant Electronics (RE)
A feature that provides failover protection in enterprise libraries. RE uses two sets of
library controller cards. At any given time, one set is active and the other set is
standby. The active library controller can failover to the standby in response to a
command from ACSLS or the SL Console. Automatic failover can be initiated by the
library if a library card fails.
robot
A mechanism that moves horizontally along a track to transport tape cartridges to and
from other locations in the library.
routing
The process of moving a packet of data from a source to a destination. Routing enables
messages to pass from one device to another device, and eventually reach their target.
SSL
See Secure Sockets Layer (SSL) .
Secure Sockets Layer (SSL)
A cryptographic protocol that provides communication security. The communication
path between the PLI and the remote operator console occurs through SSL.
TTI
See tape transport interface (TTI) .
tape cartridge
A container holding magnetic tape that can be processed without separating the tape
from the container. The library uses data, diagnostic, and cleaning cartridges. These
cartridges are not interchangeable.
tape drive
An electromechanical device that moves magnetic tape and includes mechanisms for
writing and reading data to and from the tape.
tape drive tray assembly
The mechanical structure that houses a tape drive, fan assembly, power and logic
cards, cables, and connectors for data and logic cables. Same as drive tray assembly.
tape transport interface (TTI)
An interface to control and monitor tape movement.
touch screen operator control panel
A flat-panel display with a touch screen interface and a panel mount computer. This
feature is attached to the front of the library.
vol-id
Volume ID assigned to a cartridge. Same as VOLSER .
VOLSER
Volume serial number. Same as vol-id .