Oracle e-series, Руководство по установке

Страница: 48 / 82

3-12 Installing and Operating the Tablet and Base Station E-Series
Tablet E-Series Recovery Procedures
The Tablet E-Series 8 and E-Series 11 devices offer two methods of recovery, depending
on if it can successfully boot to Windows Embedded 8.1 Industry Pro.

If the Tablet E-Series 8 or E-Series 11 device does not boot to Windows Embedded
8.1 Industry Pro, it can be recovered using a MICROS E-Series USB Recovery
Flash Drive. The USB Recovery Flash Drive can be purchased with the image
installed or you can build it yourself.
The Tablet E-Series Recovery Kit can be purchased for the E-Series 8 and E-Series
11 with the Windows Embedded 8.1 Industry Pro recovery image pre-installed.
Contact your Oracle MICROS representative for assistance.
See
Using the Tablet E-Series USB Recovery Flash Drive for instructions.

If the Tablet E-Series device can successfully boot to Windows Embedded 8.1
Industry Pro image and you want to refresh it or clear out old data, you can
restore from a recovery image that resides in a hidden drive partition. This
method uses the built-in Update and Recovery functionality of Windows
Embedded 8.1 Industry Pro to copy the recovery image from a hidden recovery
partition to the boot partition.
See
Recovering the Tablet E-Series from the Recovery Partition for instructions.
Using the Tablet E-Series USB Recovery Flash Drive
This section describes how to recover the Tablet E-Series 8 or Tablet E-Series 11 device
that will not boot to Windows Embedded 8.1 Industrial Pro 8.1 using the appropriate
Tablet E-Series USB Recovery Flash Drive.
The Tablet E-Series USB Recovery Flash Drive is the primary means of recovering or
updating the operating system image on the Tablet E-Series 8 or E-Series 11 devices.
Requirements

A Tablet E-Series USB Recovery Flash Drive for the Tablet E-Series 8 or 11 inch
models. The Tablet E-Series USB Recovery Flash Drive can be purchased or you
can build it yourself using the procedure in the Creating or Updating the Tablet
E-Series USB Recovery Flash Drive section.

Bitlocker recovery key (if Bitlocker is enabled). The Using the Tablet E-Series
Recovery Controls section describes how to connect the E-Series USB Recovery
Flash Drive to each device and points out the buttons used to access the UEFI
boot menu.

To use the Tablet E-Series 8 or E-Series 11 USB Recovery Flash Drive, the Tablet E-
Series MSR Sleeve must be temporarily removed.
Procedure
1. Temporarily remove the MSR Sleeve from the E-Series 8 or E-Series 11, and then
install the appropriate Tablet E-Series USB Recovery Flash Drive.
2. Make sure the unit is OFF. In order to access the UEFI boot menu, the device must be
started from the OFF state.
3. Press and hold the Power Button and when the unit vibrates, release it.
Immediately press and hold the Volume [+] button until a MICROS logo (E-Series 11)
or circular progress indicator appears (E-Series 8). The E-Series 8 does not display the
Oracle MICROS logo as it boots, only the circular progress indicator. When
successful, the UEFI Boot Menu appears.