Oracle e-series, Руководство по установке

Страница: 15 / 82

Introduction of the MICROS Tablet and Base Station E-Series 1-5
Tablet E-Series 11 is installed. When the Tablet E-Series is removed, it returns to sleep
within 30 seconds.
The Base Station E-Series casework is derived from the Base Station R-Series and
supports the same peripherals—Series 2 Integrated and Pole, a 2 inch thermal printer,
and a 1D/2D Wireless Bar Code scanner.
The Base Station E-Series is assigned a unique identifier by the Oracle application,
allowing it to identify key attributes, including cash drawer assignments by employees.
The Base Station E-Series tray details are below. Pulling the release pin allows the tray to
be raised for installation or removal of the Tablet E-Series 11. After installation, the tray is
closed and can be secured to Base Station E-Series with the provided key lock.
Figure 1-6 Base Station E-Series Tray
Peripheral Support
The Base Station E-Series I/O Panel features the following connectors:

2 MICROS Series 2 Cash Drawer Ports.

10/100/1000 Wired Ethernet.

2 x USB 3.0

2 x USB 2.0

4 Serial Ports
–
1 RS232 DB9 /w Software Selectable 5V/9V/12V Power
–
1 RS232 DB9 /w 12V Power (Recommended for the Mini Printer)
–
1 IDN - Switchable RS422/RS232
–
1 RJ45 Serial /w full handshake support.

1 Customer Display Port

1 MICROS Powered USB (12V, and 5V), reserved for the Protégé

Customer Display System

+12V Auxiliary Power Jack.