Oracle Database Appliance X3-2, Руководство по обслуживанию

Страница: 93 / 188

Update Disk Backplane or System FRU TLI Information
Chapter 5 • Servicing FRUs 93
showpsnc
The system information is displayed. For example:
Primary: fruid:///SYS/DBP0
Backup 1: fruid:///SYS/MB
Backup 2: fruid:///SYS/PS0
Element | Primary | Backup1 | Backup2
------------------+-------------------+-------------------+-------------------
PPN 7064195 7064195 7064195
PSN 1150FML00J 1150FML00J 1150FML00J
Product Name SUN FIRE X4170 M3 SUN FIRE X4170 M3 SUN FIRE X4170 M3
10. If the information is correct, log out. If the information is not correct (does not
match the information on the Oracle Database Appliance TLI or server serial
labels), repeat the process for information that is missing or incorrect.
Component Fault Management
Typically, when a faulty component is replaced and the server returned to service, the fault state
of the component in Oracle ILOM is automatically cleared and the component Service Required
indicator will turn off. This is the default behavior for all components that have an embedded
FRU serial number in the component firmware.
For replaced components that do not have an embedded FRU serial number, or do not
automatically clear their fault state after the component has been repaired and the server is
returned to service, you can use Oracle ILOM command line interface to manually clear the
fault state. Use the following syntax:
set /
path_to_target
clear_fault_action=true
Where path_to_target is the path to the component (such as a DIMM) that had the fault.
In addition, the Fault Management shell can also be used. Use of the Fault Management shell
is reserved for Oracle Service. For more information on component fault management, see:
Using fmadm to Administer Active Sun Hardware Faults (
http://docs.oracle.com/cd/
E24707_01/html/E24528/z400390c1426287.html#scrolltoc
) in the Oracle Integrated Lights
Out Manager Documentation Library.