Oracle Database Appliance X3-2, Руководство по обслуживанию, Страница: 79 / 188

Install PCIe Card in PCIe Riser
Chapter 4 • Servicing CRUs That Require Server Node Power Off 79
See “Install PCIe Riser in Server Nodes” on page 74 .
6.
Reconnect any cables to the PCIe card that you unplugged during the removal
procedure.
7.
Return the server node to operation.
a.
Install the server node top cover.
See “Install Server Node Top Cover” on page 139 .
b.
Install the server node into the system.
See “Install Server Node Into System Chassis” on page 140 .
c.
Reconnect any data cables to the PCIe card connectors on the system rear
panel.
d.
Power on the server node.
See “Powering On Oracle Database Appliance (Original Version)” on page 142 .
8.
Clear the PCIe card fault.
a. Log in to the server node as
root
using the Oracle ILOM CLI.
b.
To view server node faults, type the following command to list all known
faults on the system:
->
show /SP/faultmgmt
Oracle ILOM lists all known faults, for example:
SP/faultmgmt
Targets:
0 (/SYS/MB/RISER/PCIE2)
Properties:
Commands:
cd
show
c. To clear PCIe riser faults, use the
set
command. For example:
->
set /SYS/MB/RISER clear_fault_action=true
Are you sure you want to clear /SYS/MB/RISER (y/n)?
y
Set 'clear_fault_action' to 'true'
d. To clear a PCIe card fault, use the set command. For example, to clear a fault
on PCIe 2: