Oracle B31003-01 Скачать руководство пользователя

Страница: 25 / 112

Resolving Specific Errors

Troubleshooting OracleAS Adapter for IMS/TM

3-11

Action:

Check whether you have sufficient system privileges.

C027: Cannot create TCP service for %s

Cause:

An error occurred within the TCP/IP subsystem

Action:

Check the TCP/IP subsystem on the computer by trying to ping it or run

FTP or Telnet to or from it.

C028: Unable to register (%s, %d, tcp)

Cause:

This error may happen when a portmapper is used (

host

:a) but the

portmapper is not available.

Action:

Enable the portmapper.

Action:

Avoid using the portmapper (by not using

when starting the daemon).

C029: Failed to create a server thread

Cause:

Internal error.

Action:

Contact Oracle Support Services.

C02A: Server thread failed to start

Cause:

Internal error.

Action:

Contact Oracle Support Services.

C02B: Stopping the %s server - no client

Cause:

A server that was started by the Oracle Connect daemon to service a client

did not get a client connection request within one minute. The server terminates.

Action:

In most cases, the client was terminated by a user request, so no specific

action is required.

Action:

If no client can connect to the server, it may be that the server has multiple

network cards and the Oracle Connect daemon is not aware of this. In this case,
start the daemon with an IP address.

C02C: Unexpected event - a termination signal intercepted

Cause:

Internal error.

Action:

Contact Oracle Support Services.

C02D: Modified transport, context unknown/lost

Cause:

Internal error.

Action:

Contact Oracle Support Services.

C02F: Corrupted arguments passed to procedure

Cause:

Internal error.

Action:

Contact Oracle Support Services.

C030: Unable to free arguments for %s() of %s

Cause:

Internal error.

Action:

Contact Oracle Support Services.

C031: Cannot register a non-module RPC %s

Cause:

Internal error.

Action:

Contact Oracle Support Services.

Содержание B31003-01

















































































































Результаты поиска

Содержание B31003-01

Отзывы:

Похожие инструкции для B31003-01

Бренды по названию

Популярные бренды

Oracle B31003-01, Руководство пользователя

Результаты поиска

Содержание B31003-01

Отзывы:

Похожие инструкции для B31003-01

Бренды по названию

Популярные бренды