Oracle Application Server 10g, Руководство по установке

Страница: 191 / 258

Setting up the OracleAS Disaster Recovery Environment
Installing in High Availability Environments: OracleAS Disaster Recovery 10-7
127.0.0.1 localhost
213.2.2.330 asmid1.oracle.com asmid1
213.2.2.331 asmid2.oracle.com asmid2
213.2.2.110 asinfra.oracle.com asinfra
c.
Ensure that the "hosts:" line in the
/etc/nsswitch.conf
file has "files" as
the first item:
hosts: files nis dns
The entry specifies the ordering of the name resolution. If another method is
listed first, then the node will use the other method to resolve the hostname.
Verifying that the Nodes Resolve the Hostnames Correctly
After making the changes and restarting the nodes, check that the nodes resolve the
hostnames properly by running the following commands:
■
On the middle-tier nodes on both sites, run the
hostname
command. This should
return the internal hostname. For example, the command should return "asmid1"
if you run it on prodmid1 and standbymid1.
prompt> hostname
asmid1
■
On each node, ping the other nodes in the environment using the internal
hostname as well as the external hostname. The command should be successful.
For example, from the first midtier node, prodmid1, run the following commands:
prompt> ping prodinfra ping the production infrastructure node
PING prodinfra: 56 data byes
64 bytes from prodinfra.oracle.com (138.1.2.111): icmp_seq=0. time=0. ms
^C
prompt> ping iasinfra ping the production infrastructure node
PING iasinfra: 56 data byes
64 bytes from iasinfra.oracle.com (138.1.2.111): icmp_seq=0. time=0. ms
^C
prompt> ping iasmid2 ping the second production midtier node
PING iasmid2: 56 data byes
64 bytes from iasmid2.oracle.com (138.1.2.444): icmp_seq=0. time=0. ms
^C
prompt> ping prodmid2 ping the second production midtier node
PING prodmid2: 56 data byes
64 bytes from prodmid2.oracle.com (138.1.2.444): icmp_seq=0. time=0. ms
^C
prompt> ping standbymid1 ping the first standby midtier node
PING standbymid1: 56 data byes
64 bytes from standbymid1.oracle.com (213.2.2.330): icmp_seq=0. time=0. ms
Note:
In the
hosts
file, be sure that the line that identifies the
current node comes immediately after the localhost definition (the
line with the 127.0.0.1 address).
Note: Restart the nodes after editing these files.