Oracle Acme Packet 6100, Руководство по установке оборудования, Страница: 51 / 114

Acme Packet 6100 Hardware Installation Guide 43
To install your Acme Packet 6100 in a center-mount configuration:
1. Locate the following components:
• Center-mounting flanges (2)
• #10-32 x 5/16" flat head (black) screws (6)
2. Line up one chassis flange with the three tapped holes found along the
center of the side of the Acme Packet 6100 chassis. The three screw holes
of the chassis flange will only align in one direction.
Figure 4 - 63. Tapped Holes to Accommodate Center-Mounting Flange
3. Using a Phillips head screwdrive, tighten the three #10-32 x 5/16" Phillips
head (black) screws to secure the chassis flange to the chassis.
Figure 4 - 64. Center-Mounted Flange Installed
4. Repeat this procedure for the other side of the Acme Packet 6100 chassis.
Installing the Chassis
into the Rack
The Acme Packet 6100 chassis is now ready to be installed into a 2-post
equipment rack. To prevent personal injury or damage to the Acme Packet
6100 follow these guidelines:
•
This installation requires two people and should not be attempted
otherwise.
•
Follow your organization’s best practices for lifting and installing heavy
components into an equipment rack.
•
Ensure that the Acme Packet 6100 chassis remains supported until you
have completely installed it into the equipment rack.
1. Locate the following components:
• Equipment rack screws (4)
2. Lift the Acme Packet 6100 into the correct position in the equipment rack.
3. Use a #2 Phillips screwdriver to secure two screws through the mounting
flanges on the Acme Packet 6100 and into the equipment rack. One person