Oracle Acme Packet 6100, Руководство по установке оборудования, Страница: 32 / 114

24 Acme Packet 6100 Hardware Installation Guide
INTERFACE Menu
The INTERFACE menu allows you to scroll through a list of all configured
physical interfaces, including the management and media physical interfaces
and the loopback interface.
The following information is displayed for each configured interface to which
you scroll:
• Interface slot and port: interface status
•
Input packets, output packets
• Input error packets, output error packets
Slot 1: Port0 UP
PKT IN: 1,001K OUT: 223K
ERR IN: 0 OUT: 0
To use the INTERFACE menu in the graphic display:
1. From the top menu of the graphic display, press the Enter button.
2. Press the Up or Down button to scroll to the INTERFACE selection.
3. Press the Enter button.
4. Press the Up or Down button to scroll through the list of configured
physical interfaces.
5. Press the Enter button to refresh the display.
6. Press the Up or Down button to scroll to the RETURN selection.
7. Press the Enter button to return to the Top Menu.
BOOT PARAMS
Menu
The BOOT PARAMS menu allows you to view the same information
configured in the bootparam ACLI configuration. The BOOT PARAMS
selection displays the IP information necessary to connect to the
Mgmt 0
Ethernet interface, located on the rear of the Acme Packet 6100. This interface
is used primarily for maintenance, configuration, and downloading software
images.
The following information for Mgmt 0 is displayed under the BOOT PARAMS
menu:
• IP address
•
Netmask in hexadecimal format
• Gateway IP address
inet: 192.168.0.2
mask: ffff0000
gw: 192.168.0.1
To use the BOOT PARAMS menu in the graphic display:
1. From the top menu of the graphic display, press the Enter button.
2. Press the Up or Down button to scroll to the BOOT PARAMS selection.
3. Press the Enter button. The BOOT PARAMS information is displayed.
4. Press the Up or Down button to scroll to the RETURN selection.
5. Press the Enter button to return to the Top Menu.