www.opwglobal.com
Document #:
M00-20-7074 Rev. 005
Page 21 of 32
4.4
FSC to Multiple FIT Operation (3 or More Wireless Modems)
If you only have two (2) wireless modems, you do not have to configure the modems and you
may proceed with the installation instructions; the modems are pre-configured for two (2) or
less modems.
If you have three (3) or more wireless modems, continue with the configuration instructions
below:
When configuring these modems with the XTC software, set DIP switches to #1, #5/#6 ON and all others OFF.
For normal operation, #5/#6 ON and all the rest OFF.
Each modem must be configured for its EXACT location.
