www.opwglobal.com
Document #:
M00-20-7074 Rev. 005
Page 5 of 32
1. Introduction
Figure 1-1 Wireless Modem
These instructions explain setting up the modem hardware, testing the range of the radio link, some advanced
(but optional) configuration possibilities and some tips for better operation.
Some installations may not be suitable for Wireless Communications. Contact OPW-FMS
technical service for site survey and testing information if you are unsure of your potential
installation site.
1.1
Overview
Your wireless modem can be used in many applications, including:
Sites that cannot be connected by conduit, sites that contain obstructions, roads, railroad tracks,
water, etc.
Property with dig restrictions
Locations with thick, reinforced concrete, such as airports, or trucking and military installations
Up to seven (7) wireless modems can communicate within the same network.
1.2
Wireless Modem Kit
The Wireless Petro-Net Modem
®
works with the following systems:
K800™ (software 1.09 or higher)
K800
™ Hybrid
®
System2
®
C/OPT
®
FSC3000
™
SiteSentinel
®
iSite™
The
standard kit
includes:
Radio modems with 6 in (152.4 m) antennas
Petro-Net connectors
Two (2) directional antennas
Two (2) 20 ft (6.1 m) antenna cables
