DEFECT
The machine does
not switch on
The display does not indicate
a temperature
The device does not achieve a
desired temperature or exceeds
it significantly.
Pale dots appear within hot
stamped inscription
Stamped letters are blurred,
traces of paint are visible
beyond letter edges
POSSIBLE CAUSE
Temperature of the room
is lower than +8 C/46,4 F
The plug is not connected to mains
Lack of voltage in a socket
The device is damaged
Check what temperature
has been set
The device is damaged
Too low temperature
Too short time of stamping
Too low pressure
Too high temperature
Too long time of stamping
Too high pressure
REMEDY
Place the machine in a room
temperature higher than
+8C/46,4 F
Insert the plug to mains socket
Connect the machine to another socket
Contact the supplier
Set a suitable temperature
Contact the supplier
Increase temperature
Increase stamping time
Increase the pressure
(turn clockwise the knobs of the
basic plate (3)
Reduce temperature
Reduce stamping time
Lower the pressure
(turn counter-clockwise
the knobs of the basic plate (3)
25.04.05
