Stereo/Mono
Adjusting the CN17 and CN14 jumpers together switches the
speaker between some stereo and mono modes. Two mono modes
are available, see page 10 for further details.
123
No current function.
7
The AMR650-A has six ‘Push-on Jumpers’ (shown below - see
opposite for PCB location) that select between different modes of
operation. Incorrect positioning will prevent the AMR650 V2.0 from
working properly.
Fader
Turns Fader function on and off. See page 11 for futher details.
Local
Switches between LIM300 local and AMR650 V2.0 onboard option.
See page 10 for further details.
Opus/A-BUS
Swtiches between Opus Enhanced mode for use with Octopus
hubs, and normal A-BUS mode.
For use with an Octopus MCU300 A-BUS hub the jumper MUST be
in the OPUS position. For use with standard A-BUS hubs and
amplifiers from other manufacturers (or as a sub-zone to a MCU500
based system) the jumper MUST be in the A-BUS position.
AMR650-A JUMPER SETTINGS
Fader off
(default)
Fader on
LM300 mode
(default)
AMR650 V2.0
onboard mode
Opus Enhanced
mode (default)
Standard
A-BUS mode
Stereo mode
(default)
Stereo mode
(default)
CN17
CN14
Mono 1 mode
(1 channel mono)
CN17
CN14
Mono 1 mode
(1 channel mono)
Mono 2 mode
(2 channel mono)
Mono 2 mode
(2 channel mono)
CN17
CN14
