14
Frequency response
60Hz–20kHz (+/- 2dB)
THD
<0.25% @ 5W, 1kHz
Signal/Noise ratio
80dB
Input impedance (local input)
33K Ohms
Volume control range
0 to -78dB in 31 steps
Treble control range
+/- 14dB @ 20kHz, in seven
2.5dB steps (cut and boost)
Bass control range
+/- 14dB @ 100kHz, in seven
2.5dB steps (cut and boost)
Balance control range
+ 0/- 17.5dB @ 20kHz, in seven
2.5dB steps (L and R)
Fader control range
+ 0/- 17.5dB @ 20 kHz, in seven
2.5dB steps (front and back)
Pre-amp output
Variable, following volume
setting
IR passthrough
34–40kHz and 54–58kHz
frequencies supported
Speaker impedance
4 Ohms
Power requirement
+24V DC @ 1A max from hub
Weight (AMR650-A)
1.4kg / 3.1 lbs
Weight (AMR650-P)
1.1kg / 2.4lbs
Dimensions
240 x 75 (mm), 9.4 x 3 (inches)
TECHNICAL SPECIFICATIONS
This guide is designed to make using the AMR650 V2.0 as easy as
possible. Information in this document has been carefully checked
for accuracy; however, no guarantee is given to the correctness of
the contents. The information in this document is subject to change
without notice. If you notice any errors please feel free to email us
at: [email protected]
All trademarks and registered trademarks are the property of their
respective owners.
A-BUS is a registered trademark of LeisureTech Electronics Pty Ltd
Australia.
© Copyright Opus Technologies Ltd 2005
This document contains proprietary information protected by
copyright. All rights are reserved. No part of this manual may be
reproduced by any mechanical, electronic or other means, in any
form, without prior written permission of the manufacturer.
The crossed-out wheeled bin is the European Union
symbol for indicating separate collection for electrical
and electronic equipment. This product contains
electrical and electronic equipment which should be
reused, recycled or recovered and should not be
disposed of with unsorted regular waste. Please return
the unit or contact the authorised dealer from whom
you purchased this product for more information.