The Opus AMR650 V2.0 is an A-BUS™ compatible ceiling-
mounted speaker pair for use where an installer wishes to avoid the
complication of a separate keypad and speakers. It uses the
Octopus MCU300 as the hub or connects to an Opus sub-zone
output etc.
The AMR650 V2.0 consists of one active speaker with a stereo
power amplifier and other electronics built-in (AMR650-A ); and one
passive speaker (AMR650-P).
Please take the time to read this guide fully as it contains important
information and should be retained for future reference.
3
INTRODUCTION
AMR650-A
AMR650-P
Your speakers are an example of superior design and
craftsmanship. These suggestions will help you care for them so
you can enjoy them for years.
Keep the speakers dry. If they get wet dry immediately. Liquids can
contain minerals that can corrode electronic components.
Keep the speakers away from dust or dirt, which can cause
premature wear of parts.
Wipe the speaker frame occasionally with a damp cloth to keep it
looking new. Do not use harsh chemicals, cleaning solvents or
strong detergents.
CARE AND MAINTENANCE
