Optronis CoaXPress CamPerform Cyclone Series, Руководство пользователя

Страница: 26 / 35

-26-
CoaXPress standard allows Frame Grabber synchronizing camera frame generation using specific
packets called
trigger packets sent on “CoaXPress uplink”.
4.3 Optronis
Xml entry Name
Address
Description
IndicatorLamps Enables or disables indicator lamps.
EnableFan Enables or disables camera Fan power output.
Fan can be disabled during frame acquisition to avoid vibrations and enabled to
stabilize temperature when not capturing frames.
ColorSensor Indicates if camera has camera a color sensor.
‘0’ means mono sensor.
‘1’ means color sensor.
Pattern Enables or disables a frame Pattern. When disabled, sensor pixels are sent.
Pattern is a diagonal pattern and has following format:
Line 0: 0,1,2,..,255, 0,1,2,..,255,…
Line 1: 1,2,3,..,255, 0,1,2,..,255, …
…
Line N: N,N+1,N+2,..,255, 0,1,2,..,255,…
LineSkipping Enables or disables line skipping feature.
If dual ROI mode is used, it can be applied on all ROIs (“On”) on only a specific ROI
(“ROI1_Only” or “ROI2_Only”)
DualROI Enables or disables dual ROI mode.
Height_ROI1 Height of ROI1 when dual ROI mode is enabled.
Height_ROI2 Height of ROI2 when dual ROI mode is enabled.
ROI1_OffsetY Offset of ROI1 when dual ROI mode is enabled.
ROI2_OffsetY Offset of ROI2 when dual ROI mode is enabled.
ImageHeightValid Indicates if output frame height is valid with current setup (dual ROI, line skipping
are impacting this result).
DefectPixelCorrectionEnable Enables or disables defect pixel correction.
DefectPixelTestMode When enabled, this test mode eases defect pixel coordinates by showing
corrected pixels in white and non-corrected pixels in black.
DefectPixelSource Returns the source of defect pixel correction (Factory programmed or User saved).
DefectPixelTotal Returns the number of corrected pixels in the frame.
DefectPixelLineSelect Selects a line to display or modify defect pixel = defect pixel Y coordinate of
DefectPixelX(0 .. 7).
DefectPixelX0 X coordinate of defect pixel P0( X0 , Y ).
Set X0 = 0xFFFF to disable correction for pixel P0.
Set X0 = [0 .. ImageWidth] to enable correction for pixel P0.
It modifies only RAM value.
Call DefectPixelUserFlashSave() to save current defect pixel configuration.
DefectPixelX1 X coordinate of defect pixel P1( X1 , Y ).
Set X1 = 0xFFFF to disable correction for pixel P1.
Set X1 = [0 .. ImageWidth] to enable correction for pixel P1.
It modifies only RAM value.
Call DefectPixelUserFlashSave() to save current defect pixel configuration.
DefectPixelX2 X coordinate of defect pixel P2( X2 , Y ).
Set X2 = 0xFFFF to disable correction for pixel P2.
Set X2 = [0 .. ImageWidth] to enable correction for pixel P2.
It modifies only RAM value.
Call DefectPixelUserFlashSave() to save current defect pixel configuration.
DefectPixelX3 X coordinate of defect pixel P3( X3 , Y ).
Set X3 = 0xFFFF to disable correction for pixel P3.
Set X3 = [0 .. ImageWidth] to enable correction for pixel P3.
It modifies only RAM value.
Call DefectPixelUserFlashSave() to save current defect pixel configuration.
DefectPixelX4 X coordinate of defect pixel P4( X4 , Y ).
Set X4 = 0xFFFF to disable correction for pixel P4.