Optronis CoaXPress CamPerform Cyclone Series, Руководство пользователя

Страница: 27 / 35

-27-
Set X4 = [0 .. ImageWidth] to enable correction for pixel P4.
It modifies only RAM value.
Call DefectPixelUserFlashSave() to save current defect pixel configuration.
DefectPixelX5 X coordinate of defect pixel P5( X5 , Y ).
Set X5 = 0xFFFF to disable correction for pixel P5.
Set X5 = [0 .. ImageWidth] to enable correction for pixel P5.
It modifies only RAM value.
Call DefectPixelUserFlashSave() to save current defect pixel configuration.
DefectPixelX6 X coordinate of defect pixel P6( X6 , Y ).
Set X6 = 0xFFFF to disable correction for pixel P6.
Set X6 = [0 .. ImageWidth] to enable correction for pixel P6.
It modifies only RAM value.
Call DefectPixelUserFlashSave() to save current defect pixel configuration.
DefectPixelX7 X coordinate of defect pixel P7( X7 , Y ).
Set X7 = 0xFFFF to disable correction for pixel P7.
Set X7 = [0 .. ImageWidth] to enable correction for pixel P7.
It modifies only RAM value.
Call DefectPixelUserFlashSave() to save current defect pixel configuration.
DefectPixelClearAll Clears all RAM values (0xFFFF) and set DefectPixelTotal to ‘0’ .
Flash data is not impacted.
If camera is power cycled, the same flash configuration will be loaded again.
DefectPixelUserFlashSave Saves current RAM values to User flash area.
Previous user values in flash are lost.
Current values will be used at next power cycle.
DefectPixelUserFlashErase Erases current user flash values.
Previous user values in flash are lost.
No user correction will be loaded after a power cycle until new values are
saved using DefectPixelUserFlashSave.
Correction Enables or disables FFC correction.
Correction_Coeff_X Selects a column X in the frame (0 … Width_Max -1).
Correction_Coeff_V FPN & PRNU Coefficients of column X = Correction_Coeff_X.
16b integer with:
- Bit8..0 = PRNU_Coeff (valid values are 0..511)
- Bit15..9 = FPN_Coeff (valid values are 0..127)
Ex: Correction_Coeff_X = 50 & Correction_Coeff_V = 0x0280.
It means that for column n° 50:
- FPN_Coeff(column=50) = 0x1
PRNU_Coeff(column=50) = 0x80 (PRNU_coeff/128=1)
Correction_UserGD UserGD offset value of selected column X = Correction_Coeff_X.
Correction_DMean DMean offset value of selected column X = Correction_Coeff_X.
FFCSaveToFlash Saves current FFC parameters from RAM to flash.
Erases previous user FFC correction.
This new saved FFC correction will be used after next power cycle.
CXP_Trigger_Period Reference period (in µs) used to detect missing trigger packets.
CXP_Trigger_Counter_Error Returns the number of missing trigger packets.
This counter is incremented until reset by XML entry CXP_Trigger_Counter_Reset.
CXP_Trigger_Counter_Reset Resets CXP_Trigger_Counter_Error counters.
Temperature Returns camera internal temperature.
MaxFrameRateExtended If set to “Default”, the calculation of the maximal frame rate is based on sensor
size.
If set to “Extended”, the c alculation of the maximal frame rate is based on
exposure time (approximately 1/exposure time)
Again Analog gain
AOffset Analog offset applied to the sensor in mV
CounterInformation If enabled, the first pixels of the image will contain the following informations: a
16-bits image counter and 24-bits microsecond counter.
a) In 8bits-mode:
Pixel 0 contains bits 15..8 of the image counter