Optronis CoaXPress CamPerform Cyclone Series, Руководство пользователя

Страница: 14 / 35

-14-
Each 4 CoaXPress links / connector has its dedicated LED indicating its status. The table here after describes
camera link status for every possible LED state.
State Indication
No power Off
System booting Solid orange
Powered, but nothing connected
(not applicable to a Device reliant on PoCXP power) Flash_1 red
Connection detection in progress, PoCXP active AlternateFlash_12_5 green / orange
Device / Host incompatible, PoCXP active AlternateFlash_0_5 red / green
Device / Host connected, waiting for event
(e.g. trigger, exposure pulse) Flash_1 orange
Device / Host connected, data being transferred Flash_12_5 green
Error during data transfer
(e.g. CRC error, single bit error detected) 500ms red pulse
System error Flash_12_5 red
Connection test packets being sent AlternateFlash_0_5 green / orange
Firmware Update Solid red
The connector indicator lamp timings are given in the following table:
Indication Frequency (±20%) Duty Cycle (on) (±20%)
Flash_12_5 12.5 Hz 25% (20ms on, 60ms off)
Flash_1 1 Hz 25% (200ms on, 800ms off)
AlternateFlash_12_5 12.5 Hz 25% (20ms on color 1, 60ms off, 20ms on
color 2, 60ms off)
AlternateFlash_0_5 0.5 Hz 50% (1s on color 1, 1s off, 1s on color 2,
1s off etc)
External Power Supply Connector
Power connector is used to power camera when using an external power supply instead of power over
CoaXPress feature (PoCXP).
The connector is labelled “Power”.
Optronis Camera accessory “Power supply” is recommended when using an external power supply.
Alternatively, your power supply must respect bellow characteristics: