optris CSlaser 2MH, Руководство оператора

Страница: 41 / 50

-
Software CompactConnect 41 -
8.3 Digital Command Set
CSlaser/ CSvideo Commands
Decimal HEX Binary/ ASCII Command Data Answer Result Unit
1 0x01 binary READ Temp - Target no byte1 byte2 = (byte1 x 256 + byte2 - 1000) / 10 °C
2 0x02 binary READ Temp - Head no byte1 byte2 = (byte1 x 256 + byte2 - 1000) / 10 °C
3 0x03 binary READ current Temp - Target no byte1 byte2 = (byte1 x 256 + byte2 - 1000) / 10 °C
4 0x04 binary READ Emissivity no byte1 byte2 = (byte1 x 256 + byte2) / 1000
5 0x05 binary READ Transmission no byte1 byte2 = (byte1 x 256 + byte2) / 1000
9 0x09 binary READ Processor Temperature no byte1 = (byte1 x 256 + byte2 - 1000) / 10
14 0x0E binary READ Serial number no byte1 byte2 byte3 = byte1 x 65536 + byte2 x 256 + byte3
15 0x0F binary READ FW Rev. no byte1 byte2 = byte1 x 256 + byte2
16 0x10 binary READ Laser status no byte1 0 = off/ 1 = on
17 0x11 binary READ Emissivity switch setting no HEX value (e.g. 0x58) = Switch setting
(e.g. SW1=5/ SW2=8 -> Eps. = 0,58)
129 0x81 binary SET DAC mA byte1 byte1 byte 1= mA x 10 (z.B. 4mA = 4 x 10=40) °C
130 0x82 binary RESET of DAC mA output
132 0x84 binary SET Emissivity byte1 byte2 byte1 byte2 = (byte1 x 256 + byte2) / 1000
133 0x85 binary SET Transmission byte1 byte2 byte1 byte2 = (byte1 x 256 + byte2) / 1000
144 0x90 binary SET Laser byte1 byte1 0 = off/ 1 = on
Temperature calculation at CSlaser hs: (byte1 x 256 + byte2 - 10000) / 100
EXAMPLES (all bytes in HEX)
Readout of object temperature
Send: 01 Command for readout of object temperature
Receive: 04 D3 Object temperature in tenth 1000 04 D3 = dec. 1235
1235 - 1000 = 235
235 / 10 =
23,5 °C
Readout of object temperature (at hs version)
Send: 01 Command for readout of object temperature
Receive: 30 3E Object temperature in hundredth 10000 30 3E = dec. 12350
12350 - 10000 = 2350
2350 / 100 = 23.50 °C
Set of emissivity
Send: 84 03 B6 03B6 = dec. 950
Receive: 03 B6 950 / 1000 = 0,950