optris CSlaser 2MH, Руководство оператора

Страница: 37 / 50

-
Laser Sighting 37 -
7 Laser Sighting
The CSlaser has an integrated double laser aiming which helps for the alignment of
the sensor. The measuring spot is located within the two laser points. At the focus
point of the according optics
[►2.4 Optical Charts]
both lasers are crossing and
showing as one dot the minimum spot. This enables an alignment of the sensor to the
object.
Do not point the laser directly at the eyes of persons or animals! Do not stare into the laser
beam. Avoid indirect exposure via reflective surfaces!
The two laser points don’t mark the exact measurement spot. They just are for orientation only.
The exact size of the measurement spot can be found in the optical charts
[►2.4 Optical Charts]
.

At ambient temperatures >50 °C the laser will be switched off automatically.

The laser should only be used for sighting and positioning of the sensor. A permanent use of
the laser can reduce the lifetime of the laser diodes.

Furthermore, in a permanent use of the laser, the measurement accuracy can be affected.