optris CoolingJacket Advanced, Руководство оператора

Страница: 41 / 68

-
Installation 41
-
Installation of PI camera
1. Mount the camera to the focusing unit or the front part as described in chapter 3.2.1 respectively
chapter 3.2.2 (except for PI 1M/ 05M camera).
2. Seat the focusing unit or front part in the chassis ( Figure 22 ). Position it as shown in Figure 23 , by
pushing it to the bottom. The PI 1M/ 05M camera is first placed into the chassis without the front part.
After that the front part is attached to the optic. Make sure that the front part is placed at a height of
approx. 5 mm above the optic in order to be able to slide it over the chassis front plate (
Figure 19 ).
Figure 22: Inserting of the focusing unit