Optoma GT1090hdr, Руководство пользователя

Страница: 5 / 74

English
5
‡ The unit should only be repaired by authorized service personnel.
‡ Only use attachments/accessories specified by the manufacturer.
‡ Do not look into straight into the projector lens during operation. The bright light may harm your eyes.
‡ This projector will detect the life of the light source itself.
‡ When switching the projector off, please ensure the cooling cycle has been completed before
disconnecting power. Allow 90 seconds for the projector to cool down.
‡ Turn off and unplug the power plug from the AC outlet before cleaning the product.
‡ Use a soft dry cloth with mild detergent to clean the display housing. Do not use abrasive cleaners,
waxes or solvents to clean the unit.
‡ Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
‡ Do not setup the projector in places where it might be subjected to vibration or shock.
‡ Do not touch the lens with bare hands.
‡ Remove battery/batteries from remote control before storage. If the battery/batteries are left in the
remote for long periods, they may leak.
‡ Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it
can adversely affect the quality of the projector performance.
‡ Please follow the correct projector orientation installation as non standard installation may affect the
projector performance.
‡ Use a power strip and or surge protector. As power outages and brown-outs can KILL devices.
Laser Radiation Safety Information
‡ This product is classified as CLASS 1 LASER PRODUCT - RISK GROUP 2 of IEC 60825-1 : 2014
‡ This product is classified as Class 3R of IEC 60825-1:2007 and also complies with 21 CFR 1040.10
and 1040.11 except for deviations pursuant to Laser Notice No.50, dated June 24, 2007.
‡ As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015
‡ CLASS 3R LASER PRODUCT-AVOID DIRECT EYE EXPOSURE
‡ When turning on the projector, make sure no one within projection range is looking at the lens.
‡ Keep any items (magnifying glass etc.) out of the light path of the projector. The light path being
projected from the lens is extensive, therefore any kind of abnormal objects that can redirect light
coming out of the lens, can cause an unpredictable outcome such as a fire or injury to the eyes.
‡ Any operation or adjustment not specifically instructed by the user’s guide creates the risk of
hazardous laser radiation exposure.
‡ Do not open or disassemble the projector as this may cause damage by the exposure of laser
radiation.
‡ Do not stare into beam when the projector is on. The bright light may result in permanent eye damage.
Without following the control, adjustment or operation procedure may cause damage by the exposure of
laser radiation