Optocore SANE TP Series, Быстрый старт

Страница: 8 / 10

SANE with Optocore
8 / 10
rev. 2.21.024
EXAMPLE 4: Two TP devices connected to DD2FR-FX and three Y3R-TP cards connected through SANE2
In this example a DD2FR-FX Optocore unit is connected to two X6R-TP devices and three Yamaha expansion
cards connected through SANE2 connector compatible with MADI over CAT protocol. Depending on number of
cards channel count for MADI Cat 2, should match number of cards x 16. E.g. for 2 cards 32 In and 32 Out should
be configured.
This system would be configured as shown below:
1) In ID4 - Software Local Settings - Sane setup:
a. TP – ID 2: X6R-16MicIn
b. TP – ID 4: X6R-8MicIn/8LineOut
c. MADI Cat 2 IN – AES10-2003 48 ch
d. MADI Cat 2 OUT – AES10-2003 48 ch
2) In X6R-TP-16MI - Local Settings:
a. ID: 2
b. Parent ID: 4
c. AES port A: Disabled
d. AES port B: Disabled
3) In X6R-TP-8MI/8LO - Local Settings:
a. ID: 3
b. Parent ID: 4
c. AES port A: Disabled
d. AES port B: Disabled
FX unit - Local Settings – Sane Setup