SANE with Optocore
5 / 10
rev. 2.21.024
EXAMPLES
The following examples demonstrate how to configure and wire Optocore SANE TP expanders when used with
Optocore FX devices.
EXAMPLE 1: TP devices without AES ports
Seven X6R-TP SANE devices are connected to an Optocore X6R-FX device as shown in the diagram below.
This system would be configured as shown below:
1) In ID16 - Software Local Settings - Sane setup:
a. TP – ID 2: X6R-16MicIn
b. TP – ID 3: X6R-8DualMic
c. TP – ID 4: X6R-8MicIn/8LineOut
d. TP – ID 5: X6R-8MicIn/8LineOut
e. TP – ID 6: X6R-16LineOut
f.
TP – ID 7: X6R-16LineOut
g. TP – ID 8: X6R-16LineOut
2) For each X6R-TP – Local Settings:
a. ID: 2…8 (depending on the position of the device in the daisy-chain)
b. Parent ID: 16
c. AES port A and B: Disabled
The screenshots show Local Settings on X6R-TP-16MI (TP-ID 2) and X6R-TP-8MI/8LO (TP-ID 5).
FX unit - Local Settings – Sane Setup
TP-ID 2
TP-ID 5
Содержание SANE TP Series
Страница 2: ...Page intentionally left blank ...